Steps To Fix Rtlgina2.dll Errors
Rtlgina2.dll is a file used by Netgear wireless networking adapters to help your system read and process all the data that comes through the network. This file is used specifically with the WG111 USB Network Adapter and the error that it causes is changing the Welcome screen of XP to show the classic “login prompt” screen where you’re meant to type your password into. To fix this, you need to follow the instructions below…
What Causes The Rtlgina2.dll Errors?
The Rtlgina2.dll error typically shows like this:
“A recently installed program has disabled the welcome screen and Fast User Switching. To restore these features, you must uninstall the program. The following file name might help you to identify the program that made the change: RtlGina2.dll”
This problem is normally accompanied by not being able to change the “Fast User Switching” or “Welcome Screen” options inside the Control Panel of your PC. The error is caused by several problems, including registry errors… however the main cause of this issue is the way in which the NetGear software you installed has overwritten the Msgina.dll file, which controls the normal login procedure for your system. To fix the issue, you should restore the msgina.dll file back to its original state.
How To Fix The RtLgina2.dll Error
Step 1 – Download An XP Login Fix Tool
If you’re receiving this error in XP, then you should download this XP login fix tool.
This automated tool will repair the damaged or corrupt registry settings inside your computer that are affecting the Welcome Screen of your PC. To use it, you should just download & run it. It will then tell you if there are any problems or issues which need to be addressed on your system and will fix them for you. It’s recommended that if it finds and problems on your PC, you should let it fix them.
Step 2 – Rename MsGina.dll To RtLgina2.dll
The next step to cure the TrLgina2.dll error is to make sure that you’ve got a working and reliable version of this file again. To do this, you need to obtain a copy of the original MsGina.dll file and then rename it to RtLgina2.dll, and here’s how:
- Download MsGina.zip
- Unzip the MsGina.dll into your Desktop for easy access later
- Click Start > Search.
- Look for “rtlgina2.dll“ in “All or part of the filename”.
- Select Local Hard Drives option from the “look-in” selection box & click Search
- Right-click the rtlgina2.dll file displayed in search results and click Delete.
- Restart your PC and then hold down F8 to boot into “Safe Mode“
- Load up “My Computer“
- Browe to C:\Windows\System32.
- Paste the MSGINA.dll file that you downloaded in Step 1 in this folder.
- Right-click MSGINA.dll and click Rename.
- Type “rtlgina2.dll” and press Enter.
- Restart your computer normally
This should hopefully stop the error from showing, as it will restore rtlgina2.dll back to the way it was before you installed the NetGear software. However, to make sure you complete the job, you should also proceed onto step 3:
Step 3 – Clean Out The Registry
The ‘registry’ is also a big cause of issues for your computer, as it’s constantly being saved in the wrong way. This part of your system is a big database which stores vital settings and information for the Windows system, allowing your computer to run as smoothly and effectively as possible. All your software and applications need to use the registry to help them run, but the big problem is that because this part of your computer is continually being used so much, it’s often getting saved incorrectly, causing many different issues for your PC. To fix this part of your system, it’s advised that you use a ‘registry cleaner’ to cure any damaged or corrupt settings that are inside it. You can use our recommended registry cleaner below: